Welding and sheet metal work
Verfasst: Mi 16. Dez 2020, 21:08
I have made a few writeups and my blog from things I have learned when frame-off restoring a BJ40.
The writeup is a guide to some common problems you encounter when welding and do steel work on cars. The focus is on the use of basic tools, expensive tools like English wheel is not covered. Examples here are from a welding the window frame on a Land Cruiser 40 hardtop and replacing door bottoms, and building a 80 rear bumper. More will follow. (Sorry, I do not write good German, although i can read it pretty well)
Read on: https://www.inditravel.org/en/home/diy-car-work/
The writeup is a guide to some common problems you encounter when welding and do steel work on cars. The focus is on the use of basic tools, expensive tools like English wheel is not covered. Examples here are from a welding the window frame on a Land Cruiser 40 hardtop and replacing door bottoms, and building a 80 rear bumper. More will follow. (Sorry, I do not write good German, although i can read it pretty well)
Read on: https://www.inditravel.org/en/home/diy-car-work/